Crystalyte H3548 Front Hub Motor in 20 inch wheel, with hall sensors and thermistor
- 35mm wide stator and magnets
- Full 18mm of space from the disk boss to the side cover, allowing for compatibility with majority of disk calipers
- Cable routing through the sides of the axle rather than the ends, better protects the cables from damage and easier to swap nuts, washers, and torque arms on the wire side
- Thermistor for temperature monitoring via the V3 Cycle Analyst
Actual Weight (kg) | 7.9100 |
---|---|
Country of Manufacture | China |
Manufacturer | Crystalyte |
Motor Type | Direct Drive |
Motor Power Range (Watts) | 600-1200 |
Motor KV (RPM / V) | 13 |
Phase Resistance (Ohm) | 0.084 |
Disk Brake Compatible | Yes (with 2.5mm Spacer Washer) |
Rim Brake Compatible | Yes |
Rim Width (mm) | 29.5 |
Spoke Holes | 36 Hole |
Nominal Wheel Size | 20" (ISO 406) |
Flange Spoke Diameter (mm) | 232 |
Magnetic Pole Pairs | 23 |
Hysteresis Losses (N-m) | 0.77 |
Eddie Losses (N-m / rad/sec) | 0.0185 |
You may also be interested in the following product(s)
![]() HubSink SetUS$69.00 |
![]() C4825-GRUS$125.00 |