The Bafang G01 motor is a compact disk compatible 2.7kg hub with a nominal 250-350 watt power rating that works great for stealthy systems that do not require significant assist for steep hills or cargo. This motor includes a 10K thermistor on the windings to enable temperature monitoring and thermal rollback with a V3 Cycle Analyst, and features disk compatibility and a side cable exit rather than one going through the axle. Unlike many other geared motors, the eRPM at normal speed is low enough that most sensorless controllers will run fine with it. Our standard winding is about 9.8 rpm/V for 24", 26" and 700c wheels.
Genuine Anderson connectors for phase wires.
5 pin JST-SM series for hall sensors. 2-pin JST-SM for the themistor.
|Actual Weight (kg)||2.68|
|Country of Manufacture||China|
|Motor Power Range (Watts)||250-500|
|Motor KV (RPM / V)||9.8|
|Phase Resistance (Ohm)||0.139|
|Disk Brake Compatible||Yes|
|Axle Length (O.L.D.)||100|
|Nominal Wheel Size||Unlaced|
|Flange Spoke Diameter (mm)||122|
|Magnetic Pole Pairs||44|
|Hysteresis Losses (N-m)||0.40|
|Eddie Losses (N-m / rad/sec)||0.02|