Availability: Out of stock


Quick Overview

Bafang G01 Fast Wind (12.7 rpm/V) Geared Front Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug. Meant for 16" and 20" Wheels.

Bafang G01 Motor with Waterproof Julet Plug

More Views


The Bafang G01 motor is a compact disk compatible 2.7kg hub with a nominal 250-350 watt power rating that works great for stealthy systems that do not require significant assist for steep hills or cargo. This motor includes an internal 6-pole speedeometer sensor so it can use a CA-DP device and not require an exeternal speedo pickup. Unlike many other geared motors, the eRPM at normal speed is low enough that most sensorless controllers will run fine with it. This motor is configured with a high rpm/V well suited for 16" and 20" wheels. 

Uses 9-pin overmolded Higo Z910 waterproof connector for the motor phase and hall wires. Including 6-pole speedometer. Disk bolt length needs to be less than 10mm.

Please use a power limit of 700W maximum with these products

Actual Weight (kg) 2.68
Country of Manufacture China
Manufacturer Bafang
Motor Power Range (Watts) 250-500
Motor KV (RPM / V) 12.7
Phase Resistance (Ohm) 0.092
Disk Brake Compatible Yes
Axle Length (O.L.D.) 100
Spoke Holes 36 Hole
Nominal Wheel Size Unlaced
Flange Spoke Diameter (mm) 122
Magnetic Pole Pairs 44
Hysteresis Losses (N-m) 0.40
Eddie Losses (N-m / rad/sec) 0.019

You may also be interested in the following product(s)

Front G311 Kit, Advanced PAS

Front G311 Kit, Advanced PAS

From: US$425.00

To: US$1,064.00
Front G311 Kit, Basic Throttle

Front G311 Kit, Basic Throttle

From: US$325.00

To: US$889.00
Custom Motor Build

Custom Motor Build

From: US$139.00

To: US$910.00