Availability: Out of stock


Quick Overview

Crystalyte H3525 (7.1 rpm/V) UFO Front Motor, Hub Only, using L10 connector for Phase, Hall sensors and Thermistor. Paired Spoke holes.

Crystalyte 3525 Front Hub Motor

More Views

Crystalyte H3525 Front Motor, UFO Design, Hub Only, with hall sensors and thermistor and new L1019 waterproof plug
  • 35mm wide stator and magnets
  • Full 18mm of space from the disk boss to the side cover, allowing for compatibility with majority of disk calipers
  • Statorade compatible with injection port on side cover
  • Waterproof locking L1019 motor plug with Hall and Thermistor wires in single tidy connector
  • Cable routing through the sides of the axle rather than the ends, better protects the cables from damage and easier to swap nuts, washers, and torque arms on the wire side
  • Thermistor for temperature monitoring via the V3 Cycle Analyst
Actual Weight (kg) 6.9
Country of Manufacture China
Manufacturer Crystalyte
Motor Power Range (Watts) 600-1200
Motor KV (RPM / V) 7.1
Phase Resistance (Ohm) 0.225
Disk Brake Compatible Yes
Connector(s) Anderson, JST-SM
Axle Length (O.L.D.) 100
Spoke Holes 36 Hole
Nominal Wheel Size Unlaced
Motor Type Direct Drive
Flange Spoke Diameter (mm) 232
Magnetic Pole Pairs (Phaserunner) 23
Speedo Poles (for CA) 23
Hysteresis Losses (N-m) 0.77
Eddie Losses (N-m / rad/sec) 0.0185
Motor Inductance (H) 0.0005

You may also be interested in the following product(s)

Inject Motor with Statorade

Inject Motor with Statorade

HubSink Set

HubSink Set