MG60 Fatbike

Availability: In stock


Quick Overview

Bafang G60 Standard Wind (8.2 rpm/V) Rear Hub Motor with 175mm Axle for Fatbikes. Terminated with 9-pin Waterproof Higo Z910 Motor Plug

Befang G60 Rear Motor

More Views


The Bafang G60 is a rear geared hub motor that is designed for Fatbike installations. It has a 175mm axle length that can be extended with spacers to fit dropouts up to 190mm wide. The motor is a tiny bit heavier and a tiny bit less powerful than the eZee hubs and has plenty of torque for offroad riding. It uses a cassette freehub rather than a screw on freewheel for modern derailleur systems and has a disc mount as well. The hub shell includes an internal 6-pole speedeometer sensor so it can use a CA-DP device and not require an external speedo pickup. This motor is wound with a standard 8.2 RPM/V typically suited for 26" wheels.

Uses 9-pin overmolded Higo Z910 waterproof connector for the motor phase, hall, and speedometer wire that is compatible with our 20A Grinfineon controllers.

Actual Weight (kg) 4.2
Country of Manufacture China
Manufacturer Bafang
Motor Power Range (Watts) 500-1000
Motor KV (RPM / V) 8.2
Phase Resistance (Ohm) 0.080
Disk Brake Compatible Yes
Axle Length (O.L.D.) 175
Spoke Holes 36 Hole
Nominal Wheel Size Unlaced
Motor Type Direct Drive
Flange Spoke Diameter (mm) 145
Magnetic Pole Pairs 50
Hysteresis Losses (N-m) 0.58
Eddie Losses (N-m / rad/sec) 0.022
Motor Inductance (H) 0.00020

You may also be interested in the following product(s)

Custom Motor Build

Custom Motor Build

From: US$139.00

To: US$910.00


Rear Fatbike Kit, Advanced PAS

Rear Fatbike Kit, Advanced PAS

From: US$470.00

To: US$1,095.00