CA Accessories

We produce a number of Cycle Analyst accessories and repair/replacement parts:

  • Analogger: For recording CA output data and optional GPS data to an SD memory card for trip analysis 
  • Aux Input: Switches and Potentiometer Inputs to adjust limits and change mode-presets with the V3 CA. 
  • Cables/Hardware: Spare parts to facilitate the wiring and installation of a Cycle Analyst in unusual setups.
  • Shunts: For connecting the CA to systems that don’t have a 6-pin Cycle Analyst plug tapping into the controller shunt.
  • Temp Sensors: Monitor your motor or battery temperature and enable automatic thermal rollback with the V3 CA.
  • Torque/PAS Sensors: Enable pedalec modes, proportional torque assistance, and even human power readouts with the V3 CA

28 Item(s)

Grid  List 

Set Descending Direction
  • Large Backlit Character LCD Module for CA Repair

    CA LCD Display

    US$18.00
    Replacement Large Screen LCD Module for Cycle Analyst
  • CA-LOG

    CA-LOG

    US$99.00
    Cycle Analogger for Recording CA Data to SD Memory Card
  • CA-LOG_GPS

    CA-LOG_GPS

    US$150.00
    Cycle Analogger with GPS, for Recording CA Data and Trip Route to SD Memory Card
  • CA-USB

    CA-USB

    US$18.00
    TTL to USB Cable for Reflashing CA's and Data Logging to a PC
  • CA3_Adapter

    CA3_Adapter

    US$22.00
    Adapter Module for Connecting CA3 Device to old CA2 Controller, with Throttle and Ebrake Outputs
  • CA3_AuxP

    CA3_AuxP

    US$35.00

    Out Of Stock

    Auxilliary Potentiometer for Infinite On-the-Fly Limit Adjustments of CA3
  • CNC Machined Handlebar Mounted Aux Potentiometer for V3 Cycle Analyst

    CA3_Aux_Al

    US$25.00

    Backorder Available

    CNC'd Aluminum Handlebar Mounted Auxilliary Potentiometer for Infinite On-the-Fly Limit Adjustments of CA3
  • Digital Aux Buttons, for CA 3.1 Firmware

    CA3_DAux

    US$7.50
    Two Button Up/Down Digital Aux Input for CA3.1 Firmware
  • CA3_Switch

    CA3_Switch

    US$12.00
    3 Level Auxiliary Input Switch for CA3 Device, with Resistors for 1.6, 2.5, and 3.3V
  • CA3_Therm

    CA3_Therm

    US$8.00
    10K NTC thermsitor with 2m lead and JST plug for CA3
  • CACable

    CACable

    US$10.00
    60cm Long CA-DP Extension Cable, 6-pin JST-SM Male to Female
  • CA_6PinF

    CA_6PinF

    US$10.00
    Spare 6-pin Female Cable Harness for modifying controllers to have CA-DP plug
  • CA_Bracket

    CA_Bracket

    US$18.00
    Spare Grin Tech Handlebar Mounting Bracket for Cycle Analyst, 100% Stainless Hardware
  • CA_Security

    CA_Security

    US$10.00
    Set of Security Screws and Tool to make CA / Lumenator Bracket Tamper-Proof
  • CA_Speedo

    CA_Speedo

    US$8.00
    Speedometer Sensor for converting a CA-DP into a CA-DPS device
  • Bracket for installation of CA to Steer Tube

    CA_SteerBracket

    US$16.00
    Stainless Steel Mounting Plate for Attaching CA to Bicycle Steer Tube
  • CA_TRS

    CA_TRS

    US$10.00
    Spare TRS Communication Cable for interfacing Analogger to Older CA's
  • ConSleeve

    ConSleeve

    US$5.00

    Backorder Available

    Velcro Strechy Sleeve to cover wires and connectors
  • Front CA Enclosure

    Front CA Enclosure

    US$18.00
    Spare Front Enclosure and Button Membrane Circuit for Large Screen Cycle Analyst
  • PAS_12P

    PAS_12P

    US$24.00
    CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Square Taper Spindle Mount
  • PAS_12P_Chr

    PAS_12P_Chr

    US$24.00
    CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Chainring Mount. Must have Steel Chainring bolts. For 74mm 5 Bbolt and 64mm 4 Bolt Cranksets.
  • Shunt-CA3

    Shunt-CA3

    US$24.00
    Precision 1mOhm Stand Alone Shunt with Pigtail Leads and 6-Pin CA-DP Plug. Includes Throttle Pass-Thru
  • Shunt0.25

    Shunt0.25

    US$18.00
    0.25 mOhm external shunt for CA-HC, up to 300A continuous, 800A peak..
  • Shunt0.5

    Shunt0.5

    US$20.00
    0.5 mOhm external shunt for CA-HC, up to 150A continuous, 400A peak..
  • Shunt_Raw

    Shunt_Raw

    US$18.00
    Quantity 5 pcs of Precision Raw 1mOhm 1% Manganin Shunt, for Custom CA Harnesses
  • ThermCable

    ThermCable

    US$6.00
    1.8m Long 2-pin JST-SM Male to Female Extension Cable for Thermistor to CA3
  • Thermistor10K

    Thermistor10K

    US$3.00
    Bare 10K NTC Thermistor for V3 CA temp sensing, and NiMH / NiCd Packs .
  • ThrotCable

    ThrotCable

    US$9.00
    3-pin Throttle Extention Cable, 72 inches

28 Item(s)

Grid  List 

Set Descending Direction